Suzuki DF115BG 2021 Owner's Manual page 33

NOTE:
• " A" is not displayed if the trim position does
not appear on the multifunction gauge
screen.
• The PTT switch operations take priority, even
when the Auto Trim mode is set "ON".
• If the PTT switch is operated when the Auto
Trim mode is set "ON", the Auto Trim mode is
interrupted and the " A" flashes on the dis-
play. Auto Trim mode engages again when
the engine speed is reduced to 1500 r/min or
below or the outboard motor is set in the full
trim down position.
3. Diagnosis
Press the [ ] or [
nosis" and then press the [SET] button to
display the Diagnosis selection menu.
Diagnosis
Current Code
Data Output
Current Code
Press the [ ] or [
Code" and, then press the [SET] button to dis-
play the diagnostic code and/or caution mes-
sage that are currently activated.
Current Code
(Refer to the CAUTION SYSTEM and DIAG-
NOSTIC SYSTEM section)
30
] button to select "Diag-
] button to select "Current
Data Output
NOTE:
For details the proper handling of the multi-
function gauge,
INSTRUCTION MANUAL" packed in the gauge.
Press the [ ] or [
Output" and then press the [SET] button to dis-
play the Data Output selection menu.
Data Output
Create Data
Log
Create Data:
The "Create Data" items (engine oil change fre-
quency, total operation hours, etc.) can be
checked.
Log:
The "Create Data" items (engine oil change fre-
quency, total operation hours, etc.) obtained
and saved before, can be checked.
4. Display
While [Display] is selected, press the [SET] but-
ton to display the selection menu for Digital indi-
cation "D", Analog indication "A", and indication
OFF.
Select the display item using the [
button. Then, press the [SET] button to select
"A1", "A2", "D" or "OFF".
As the "Fuel" screen displays only in digital
mode, the available selection is either "ON" or
"OFF."
refer to "OPERATION
] button to select "Data
] or [ ]