Switching the communication mode of
the keyless fob
Press and hold the lock button 1 on the key-
less fob for more than one second to switch
between ON mode and OFF mode.
ON mode:
The Keyless Start System can be used.
OFF mode:
The Keyless Start System cannot be used.
NOTE:
If the lock button is pressed briefly while in com-
munication ON mode, the LED 2 on the key-
less fob briefly flashes once.
KEYLESS FOB BATTERY REPLACEMENT
V WARNING
This product contains a coin/button cell bat-
tery. If swallowed, the coin/button cell battery
can cause severe internal burns in just 2
hours and may lead to death.
• THE BATTERY IS A CHEMICAL BURN HAZ-
ARD. DO NOT INGEST THE BATTERY. If you
think batteries might have been swallowed
or placed inside any part of the body, seek
immediate medical attention.
• Keep new and used batteries away from
children. If the battery compartment cannot
be closed securely, stop using this product
and keep it away from children.
V CAUTION
There is a danger of explosion if the battery is
replaced with an incorrect type.
Only replace the battery with the same or
equivalent type.
V CAUTION
Do not expose Hand Unit to excessive heat
such as from sunlight or fire.
NOTICE
To prevent damage to the keyless fob, be care-
ful when replacing the battery.
• Install the lithium disc-type battery with the
electrodes facing the proper direction.
• Do NOT touch the internal circuit of the key-
less fob when replacing the battery.
IIf the keyless fob battery runs low, "Keyless
FOB Battery Low" appears on the gauge, which
indicates the battery should be replaced.
17