08-Maintenance
2/5/99
3.20
Maintenance
9:37 AM
Page 6
6. Examine the test print.
A - Draft Mode Alignment
1
2
3
B - Normal Mode Alignment
1
2
3
7. If the vertical lines are straight, no adjustment is needed. If the lines are
not straight, select the number of the closest straight lines, and click OK.
8. Repeat the test until the alignment is correct.
9. When alignment is complete, click Cancel.
Replacing the Print Cartridge
When you notice the print becoming light, check if the print cartridge is
low on ink in the Status monitor, and replace with a new cartridge.
1. Open the front cover.
2. Press the CARTRIDGE button to move the cartridge carrier to the install
position.
4
5
4
5