Table of Contents
Advertisement
02-Setup
2/5/99
10:31 AM
1.12
Set Up Your SmartJet
Page 12
Running Printer Test
Each time you install a new print cartridge, run the printer test to check if
the printer mechanism is functioning properly.
1. Press the READY button to turn the system off.
2. Press the CARTRIDGE button first, and the READY button next, then
hold down both of them for approximately 1 second.
3. The machine prints out a test pattern to show the status of the printer
mechanism.
Examine the test pattern and look for a break in the diagonal line. A
broken line shows any clogged nozzles. If the diagonal lines are not
broken and the bars are clear, the printer mechanism is functioning
properly. See the pattern sample below.
Sample of Test Pattern
Colour cartridge
Black cartridge
Advertisement
Table of Contents
Troubleshooting
