Section 4: Finishing; Finishing Around The Fireplace; Television Installation; Mantle And Hearth - Montigo PCPR8 Installation & Maintenance Manual

Section 4: Finishing

Finishing Around the Fireplace

The following illustrates the suggested finishing method for the Prodigy
The Prodigy fireplace is designed for zero clearance installation. That
is, combustible finishing materials may be installed directly against the
fireplace body. These materials can be fastened directly to the fireplace
provided the fasteners do not penetrate further than 1/2" into the unit
or impede glass installation. To ensure glass can be safely removed for
cleaning, it is recommended that flush finishing materials not extend
more than 4" from the fireplace.
16
Finishing Material -
can be fastened to
the face of the
fireplace
Fasteners may only
Material MUST NOT
be installed above
extend past the edge
the glass mounting
channels. Maximum
penetration into
fireplace body: 1/2"
3" No screw zone
above and below the
glass
Outer Glass
3" No screw zone
above and below
the glass
Television Installation
Montigo does not require any special clearances to be maintained
between a wall mounted television and the fireplace glass. Check the
TV owner's manual for any manufacturer's required clearances.

Mantle and Hearth

Installation
Combustible or non-
combustible mantels and
hearths may be placed above/
below the top of the glass
viewing area. There are no
restrictions on depth for
mantels, for hearth depth
please refer to finishing
instructions.
No
restrictions
on mantel
depth
No restrictions on
hearth depth or
distance from the lower
glass edge. However,
keep in mind mounting
a flush hearth directly
underneath the glass
will make the glass
removal process
more difficult and
risks chipping and or
breakage on the hearth.
XG0799 - 081319