Table of Contents
Advertisement
Section 6: Electrical System
Energy page shows the generator controls.
Settings page shows pairing, temperature units, software version, forget all (disconnects
paired devices).
Tire Pressure Monitor System:
If your RV is equipped with a Tire Pressure Monitoring System (TPMS), please refer to a
separate section in the Table of Contents. The TPMS settings can only be displayed and
changed via the smartphone app. There is no provision for TPMS on the mini control dis-
play mounted inside the RV.
For complete detailed operating instructions for the BMPro Mini System refer to the BMPro
owners manual in your warranty packet.
LCI One Control® App(if so equipped)
Certain models of RVs include a Bluetooth control
module that works in concert with the LCI One Con-
trol App for your smartphone, tablet or other smart
device. When connecting to this app, certain sys-
tems in your RV can be controlled remotely from
your smart device. The free app is available through
Google Play Store or the App Store (for IPhone).
The One Control Device Selection screen will look
similar to (Fig 1).
NOTE: Not all the functions depicted here will necessarily be available on
your model RV. The systems shown are only a possible representation of
what you could see on your smart device. If specific apps are not displayed
on your device they are not installed and may not be available for your RV.
The One Control System will NOT operate the hall light, lights located inside each slide-out,
exterior amber/red marker lights, or the LED lights located on the front or rear caps.
Connecting to the Bluetooth Control module:
A Bluetooth control module is mounted in the basement
area of the RV. It transmits a Bluetooth signal for the LCI
One Control app. A Password and a Device Name are re-
quired for this Bluetooth connection. The Password and
Device Name can typically be found on a label located
inside a cabinet near the entrance door of the RV (Fig 2).
The password and device name will also be located on a
label on the control module in the basement area although
this may not be easily accessible.
The password is 6 numerical digits. Device name will be LCIRemotexxxxxxxxx (x's are
9 alpha numeric characters). To connect: enable Bluetooth on your smart device, scan for
available Bluetooth connections, and you should see the LCIRemotexxxxxxxxx name ap-
pear as a connection. Select that, and it should then prompt for the 6 digit password.
Awning Operation: Select the AWNING icon; the screen opens showing the awnings (Fig
6). If there are multiple awnings, there will be a selection for each awning at the left of the
screen. Select the awning you want to control, then press and hold the EXTEND (B) or
88
Maintenance Record
Table of Contents
Advertisement
Table of Contents
