Manual
If none of the automatic settings display the time
correctly, you can set the time manually.
However, if you schedule recordings from the TV
Guide, we recommend not to change the time and
date manually. In some countries, for some network
operators, the clock settings are hidden to avoid an
incorrect clock setting.
To set the TV clock manually (if available)...
1 - Press SETTINGS, select All Settings and
press OK.
2 - Select Region and Language and select
Clock > Auto Clock Mode and press OK.
3 - Select Manual and press OK.
4 - Press (left) and select Date or Time and press
OK.
5 - Press (up) or (down) to adjust the value.
6 - Press (left) to go back one step or press
BACK to close the menu.
Time Zone
For some countries, you can select specific time
zones to set the TV clock correctly.
To set the time zone (if available)...
1 - Press SETTINGS, select All Settings and
press OK.
2 - Select Region and Language and
select Clock and press OK.
3 - Select Time Zone and press OK.
4 - According to your country, you can select a time
zone or set a time offset to correct the TV clock.
5 - Press (left) to go back one step or press
BACK to close the menu.
Sleep Timer
With the Sleep Timer, you can set the TV to switch to
standby automatically after a preset time.
To set the Sleep Timer...
1 - Press SETTINGS, select All Settings and
press OK.
2 - Select General Settings, select Sleep Timer and
press (right). With the slider bar you can set the
time to up to 180 minutes in increments of 5 minutes.
If set to 0 minutes, the Sleep Timer is switched off.
You can always switch off your TV earlier or reset the
time during the countdown.
3 - Press (left) to go back one step or press
BACK to close the menu.
Remote Control Keyboard
The standard layout of the Remote Control Keyboard
is Qwerty.
Azerty keyboard
Depending on your region, the Remote Control
Keyboard can be set to Azerty. The Azerty characters
are shown at the top right of the relevant keys.
To set the keyboard layout to Azerty...
1 - Press SETTINGS, select All Settings and
press OK.
2 - Select Region and Language > Remote Control
Keyboard.
3 - Select Azerty or Qwerty and press OK.
4 - Press (left) to go back one step or press
BACK to close the menu.
Cyrillic keyboard
Depending on your region, the Remote Control
Keyboard can be switched to Cyrillic characters.
The Cyrillic characters are shown at the top right of
the keyboard keys.
To write Cyrillic characters...
1 - Press on the remote control.
2 - Press again to switch back to Qwerty.
22.8
Universal Access
Switch On
With Universal Access switched on, the TV offers
extra features for the deaf, hard of hearing, blind or
partially sighted people.
Switch on
If you did not switch on Universal Access during the
installation, you can still switch it on. With Universal
Access switched on, the option Universal Access is
added in the Options menu.
To switch on Universal Access...
1 - Press SETTINGS, select All Settings and
press OK.
2 - Select Universal Access and press (right) to
select Universal Access and press OK.
3 - Select On and press OK.
4 - Press (left) to go back one step or press
BACK to close the menu.
77