Philips 8601 Series User Manual page 74

4 - Select the colour that matches the colour of the
wall behind the TV and press OK.
5 - Press  (left) to go back one step or press 
BACK to close the menu.
TV Switch Off
With TV Switch Off, you can set Ambilight to switch
off immediately or slowly fade out when you switch
off the TV. The slow fade out gives you some time to
switch on the lights in your living room.
To select the way how Ambilight switches off...
1 - Press  SETTINGS, select All Settings and
press OK.
2 - Select Ambilight > Advanced and press OK.
3 - Select TV Switch Off and press OK.
4 - Select Fade Out to Off or Immediate Switch Off
and press OK.
5 - Press  (left) to go back one step or press 
BACK to close the menu.
ISF Tuning
When an ISF expert calibrates the TV, a static
Ambilight colour can be calibrated. You can select
any colour you want to calibrate. With the ISF
Calibration done, you can select the static ISF colour.
To select the ISF static colour...
Press  (Ambilight) and select ISF and press OK.
For more information, press the colour

key Keywords and look up ISF® Calibration.
22.5
Eco Settings
Energy Saving
If you select Energy Saving, the TV switches to Picture
Style - Standard automatically, the most ideal energy
conscious setting for the picture and Ambilight.
To set the TV in Energy Saving...
1 - Press  SETTINGS, select All Settings and
press OK.
2 - Select Eco Settings and press OK.
3 - Select Energy Saving, the Picture Style is set to
Standard automatically. The setting is marked with a
 (leave).
4 - Press  (left) to go back one step or press 
BACK to close the menu.
Screen Off
If you use the TV to listen to music, you can switch off
the TV screen to save energy.
To switch off the TV screen...
1 - Press  SETTINGS, select All Settings and
press OK.
2 - Select Eco Settings and press OK.
3 - Select Screen Off and press OK. The screen will
switch off.
4 - Press  (left) to go back one step or press 
BACK to close the menu.
To switch the screen back on, press any key on the
remote control.
Light Sensor
To save energy, the built-in ambient light sensor
lowers the brightness of the TV screen when the
surrounding light darkens. The built-in light sensor
automatically adjusts the picture, together with
Ambilight, to the lighting conditions of the room.
To activate the light sensor...
1 - Press  SETTINGS, select All Settings and
press OK.
2 - Select Eco Settings and press OK.
3 - Select Light Sensor and press OK. When the
Light Sensor is activated, the setting is marked with
a  (leave).
4 - Press  (left) to go back one step or press 
BACK to close the menu.
Switch Off Timer
If the TV receives a TV signal but you don't press a
key on the remote control during a 4 hour period, the
TV switches off automatically to save energy. Also, if
the TV does not receive a TV signal nor a remote
control command for 10 minutes, the TV switches off
automatically.
If you use the TV as a monitor or use a digital receiver
to watch TV (a Set-Top Box - STB) and you do not
use the remote control of the TV, you should
deactivate this automatic switch off.
To deactivate the Switch Off Timer ...
1 - Press  SETTINGS, select All Settings and
press OK.
2 - Select Eco Settings and press OK.
3 - Select Switch Off Timer and press  (right).
4 - Press  (up) or  (down) to adjust the value.
The value 0 (Off) deactivates the automatic switch
off.
5 - Press  (left) to go back one step or press 
74