Philips 8601 Series User Manual page 76

Channel and press OK.
3 - Select Off and press OK.
Factory Settings
You can set the TV back to the original TV settings
(the factory settings) for picture, sound and Ambilight.
To switch back to the original settings...
1 - Press  SETTINGS, select All Settings and press
OK.
2 - Select General Settings and press OK.
3 - Select Factory Settings and press OK.
4 - Select Ok and press OK.
5 - Press  (left) to go back one step or press 
BACK to close the menu.
Reinstall TV
You can redo a full TV installation.
To redo a full TV installation...
1 - Press  SETTINGS, select All Settings and
press OK.
2 - Select General Settings and press OK.
3 - Select Reinstall TV and press OK.
4 - Follow the instructions on screen. The installation
may take a few minutes.
22.7
Language, Region and Clock
Menu Language
Change the language back to your language.
1 - Press  (the round key above the OK key).
2 - Select the  icon (Settings) and press OK .
3 - Press 5 times  (down).
4 - Press 3 times  (right), select your language and
press OK.
5 - Press  BACK to close the menu.
Language preferences
Preferred Subtitle Language
A digital broadcast can offer several subtitle
languages for a programme. You can set a preferred
primary and secondary subtitle language. If subtitles
in one of these languages are available, the TV will
show the subtitles you selected.
To set the primary and secondary subtitle language...
1 - Press  SETTINGS, select All Settings and
press OK.
2 - Select Region and Language and
select Languages > Primary Subtitles or Secondary
Subtitles.
3 - Select the language you need and press OK.
4 - Press  (left) to go back one step or press 
BACK to close the menu.
Preferred Audio Language
A digital broadcast can offer several audio languages
(spoken languages) for a programme. You can set a
preferred primary and secondary audio language. If
audio in one of these languages is available, the TV
will switch to the audio language.
To set the primary and secondary audio language...
1 - Press  SETTINGS, select All Settings and
press OK.
2 - Select Region and Language and
select Languages > Primary Audio or Secondary
Audio.
3 - Select the language you need and press OK.
4 - Press  (left) to go back one step or
press  BACK to close the menu.
Clock
Date and Time
Automatic
The standard setting for the TV clock is Automatic.
The time information comes from the broadcasted
UTC - Coordinated Universal Time information.
If the clock is not correct, you can set the TV clock to
Country Dependent. For some countries, you can
select a specific time zone or set a time offset. In
some countries, for some network operators, the
clock settings are hidden to avoid an incorrect clock
setting.
To set the TV clock...
1 - Press  SETTINGS, select All Settings and
press OK.
2 - Select Region and Language and select
Clock > Auto Clock Mode and press OK.
3 - Select Automatic or Country Dependent and
press OK.
4 - Press  (left) to go back one step or press 
BACK to close the menu.
76