Philips 8601 Series User Manual page 73

4 - Secondly, indicate the Distance between the
bulb and the TV. The further away from the TV, the
weaker the Ambilight colour. Select the slider bar to
adjust the distance.
5 - Finally, set the Brightness of the bulb. Select the
slider bar to adjust the brightness.
6 - To stop configuring this bulb, select OK and
press OK.
7 - In the Configure Ambilight+hue menu, you can do
the same for each bulb.
8 - When all Ambilight+hue bulbs are configured,
select Finish and press OK.
Ambilight+hue is ready for use.
Switch On or Off
You can switch off the Ambilight+hue effect on the
bulbs. The bulbs will light up white.
To switch off Ambilight+hue...
1 - Press  SETTINGS, select Ambilight+hue and
press OK.
2 - Select Off or On and press OK.
3 - Press  (left) to go back one step or press 
BACK to close the menu.
Immersion
You can adjust the level of the Ambilight effect for the
Ambilight+hue bulbs.
To adjust the Ambilight+hue Immersion...
1 - Press  SETTINGS, select All Settings and
press OK.
2 - Select Ambilight > Ambilight+hue and press OK.
3 - Select Immersion and press  (right).
4 - Press  (up) or  (down) to adjust the value.
5 - Press  (left) to go back one step or press 
BACK to close the menu.
View Configuration
In View configuration, you can consult the current
Ambilight+hue configuration. Which network you use,
how many bulbs are connected, etc.
To view the current Ambilight+hue setup...
1 - Press  SETTINGS, select All Settings and
press OK.
2 - Select Ambilight > Ambilight+hue and press OK.
3 - Select View Configuration and press OK.
4 - Press  (left) to go back one step or press 
BACK to close the menu.
Reset Configuration
You can reset (uninstall) the complete Ambilight+hue
configuration in one go.
To reset the Ambilight+hue configuration...
1 - Press  SETTINGS, select All Settings and
press OK.
2 - Select Ambilight > Ambilight+hue and press OK.
3 - Select Reset Configuration and press OK. The
configuration is reset.
4 - Press  (left) to go back one step or press 
BACK to close the menu.
Lounge Light
With the TV on standby, you can switch on Lounge
Light. Lounge Light is Ambilight without video. You
can also switch on Lounge Light when the TV is
switched on but the screen is switched off to save
energy — like when you are listening to a radio
station.
Standby
With the TV in standby, press  AMBILIGHT to
switch on Lounge Light. Press  again to toggle
through the different colour schemes as you can find
them in the Follow Colour menu. Press  again to
switch off.
Screen Off
With the TV switched on but the TV screen switched
off, press  AMBILIGHT to switch on Lounge
Light. With the  AMBILIGHT key you can toggle
through the audio style set in the Follow Audio menu
or the colour scheme set in the Follow Colour
menu. Press  again to switch off.
In Help, press the colour key
up Screen Off for more information on how to
switch off the screen to save energy while you are
listening to a radio station.
Advanced
Wall Colour
With Wall Colour, you can neutralise the influence of
a coloured wall on the Ambilight colours. Select the
colour of the wall behind the TV and the TV will
modify the Ambilight colours to appear as they are
intended.
To select the colour of the wall . . .
1 - Press  SETTINGS, select All Settings and
press OK.
2 - Select Ambilight > Advanced and press OK.
3 - Select Wall Colour and press OK.
73

Keywords and look