Philips 8601 Series User Manual page 70

Problems
Lost connection
• Position the wireless speaker within a range of 5
meters from the TV.
• Places with a high amount of wireless activity -
apartments with lots of wireless routers - can hamper
the wireless connection. Keep the router and wireless
speaker as close to the TV as possible.
Audio and Video syncronisation
• Before you purchase a wireless Bluetooth speaker,
inform yourself about its quality of Audio to Video
syncronisation, commonly called 'lip sync'. Not all
Bluetooth devices perform correctly. Ask your dealer
for advice.
Sound Settings
Bass
With Bass, you can adjust the level of low tones in the
sound.
To adjust the level...
1 - Press  SETTINGS, select All Settings and
press OK.
2 - Select Sound and press OK.
3 - Select Bass and press  (right).
4 - Press  (up) or  (down) to adjust the value.
5 - Press  (left) to go back one step or press 
BACK to close the menu.
Treble
With Treble, you can adjust the level of high tones in
the sound.
To adjust the level...
1 - Press  SETTINGS, select All Settings and
press OK.
2 - Select Sound and press OK.
3 - Select Treble and press  (right).
4 - Press  (up) or  (down) to adjust the value.
5 - Press  (left) to go back one step or press 
BACK to close the menu.
Headphone Volume
With Headphones Volume, you can set the volume of
a connected headphone separately.
To adjust the volume...
1 - Press  SETTINGS, select All Settings and
press OK.
2 - Select Sound and press OK.
3 - Select Headphone Volume and press  (right).
4 - Press  (up) or  (down) to adjust the value.
5 - Press  (left) to go back one step or press 
BACK to close the menu.
Surround Mode
With Surround Mode, you can set the sound effect of
the TV speakers.
To set the surround mode...
1 - Press  SETTINGS, select All Settings and
press OK.
2 - Select Sound and press OK.
3 - Select Surround Mode and press OK.
4 - Select Stereo or Incredible Surround and press
OK.
5 - Press  (left) to go back one step or press 
BACK to close the menu.
Advanced Settings
Auto Volume Levelling
With Auto Volume Levelling, you can set the TV to
automatically level out sudden volume differences.
Typically at the beginning of adverts or when you are
switching channels.
To switch on or off...
1 - Press  SETTINGS, select All Settings and
press OK.
2 - Select Sound and press OK.
3 - Select Advanced > Auto Volume Levelling and
press OK.
4 - Select On or Off and press OK.
5 - Press  (left) to go back one step or press 
BACK to close the menu.
Speakers
In this menu you can switch the TV speakers on or off.
If you connect a Home Theatre System or a wireless
Bluetooth speaker, you can select which device is
playing the TV sound. All available loudspeaker
systems are shown in this list.
If you use an HDMI CEC connection for an audio
device (like a Home Theatre System), you can select
EasyLink Autostart. The TV will switch on the audio
device, send the TV sound to the device and switch
off the TV speakers.
To select the speakers you want...
1 - Press  SETTINGS, select Speakers and press
OK.
2 - Select the loudspeaker system you want and
press OK.
3 - Press  (left) to go back one step or press 
70