Table of Contents
Advertisement
4 FIXED DUAL MOUNT
4.9
Adjusting the Back Angle and Back Depth
1.
Loosen the screws A on the side of both clamp bodies B.
2.
Adjust the angle adjustable brackets C in the clamp bodies to
achieve the desired back angle and back depth.
Angle and depth adjustments must be made equally on
both sides.
3.
Tighten the screws on both clamp bodies to secure the back into
position.
B
C
A
Invacare® Matrx® MX1
4.10 After Installation
1.
Verify that all mounting hardware is fully tightened.
2.
Ensure that the back is securely attached to the wheelchair.
20
Part No. 1171914
Advertisement
Table of Contents
