Adjusting Seat Depth - Invacare User guide User Manual

2. Using a hex wrench loosen the adjustment screws .
3. Gently pull/push the side of the seat, until it
reaches the desired position.
4. Re-tighten the adjustment screws using a hex
wrench
5. Repeat for opposite side of chair.
6. Replace the seat cushion
NOTE:
Ensure the backboard is firmly secured before fitting the cushion or using the wheelchair.
8.4

Adjusting Seat Depth

WARNING
• This adjustment should only be performed when the wheelchair is unoccupied.
• Take care not to damage any accessories fitted to the seat.
The seat can be adjusted in depth. This can be useful if another type of seat cushion is to be fitted,
or to better accomodate the user.
Seat Frame Adjustment
1. Remove the seat cushion (see section 8.1).
56
Set Screw