Table of Contents
Advertisement
3 MONO MOUNT
4.
Position the rigidizer bracket B at a 45° angle to the band clamp.
5.
Align the edges of the clamp with the corresponding slots F in the
rigidizer bracket.
6.
Carefully slide the rigidizer bracket onto the band clamp.
7.
Ensure the clamp is fully engaged in the slots in the rigidizer bracket.
8.
Insert the two locking pins G into the rigidizer bracket to hold the
band clamp in place.
9.
Ensure the pins are fully inserted into the rigidizer bracket.
The pins should slide into position with little effort. If the
pins are difficult to insert, verify that the band clamp is
properly centered and fully seated inside the slots of the
rigidizer bracket.
B
4
5
D
E
F
3
Invacare® Matrx® MX1
STANDARD
INSTALLATION
8
G
OPTIONAL INVERTED POSITION
FOR 9" (23 CM) TALL BACKS
E
3
D
B
10
F
G
Part No. 1171914
Advertisement
Table of Contents
