PRODUCT OVERVIEW
T3LVD20-200:
Teledyne Test Tools new
differential voltage probe, featuring 200 MHz bandwidth, + 20V (DC + Pk AC), fast and accurate
waveform capture, measurement accuracy of 2% and low test circuit loading.
This probe can be used with any oscilloscope having a 50Ω or 1MΩ BNC input.
Key Features
Accurate and easy voltage measurements.
●
Wide 200 MHz bandwidth.
●
Differential signal input of + 20V (DC + Peak AC).
●
High differential input impedance of
●
Maximum common mode voltage of + 60V.
●
Combined single ended and differential
●
measurements.
Use with any scope with a
●
BNC connector.
Over-Voltage protection with dual indicators.
●
T3LVD20-200 Product Description
Page 2
+ 20 V, 200 MHz
T3LVD20-200 low voltage differential probe is a wide bandwidth active
1 MΩ / <3.5pF.
50Ω or 1MΩ input and
Applications
Embedded low voltage power design and power
●
component measurements.
Low voltage consumer electronics and household
●
appliances.
Domestic and industrial photo-voltaic (PV) system
●
design.
Vehicle electronics.
●
Industrial and military control electronics.
●
Single ended and differential busses (CAN, CAN FD,
●
LIN, I2C, SPI, MIL-STD-1553B, UART, ARINC429, etc).
Research and development.
●
Universities, general electronics and education.
●