8.4 Setting Up SPEL CT (For SPEL CT User)
8.4.1 Installing SPEL CT
(1) Set the first disk of the SPEL CT Setup Disks in the FDD.
(2) Select the [Run] from the [Start] menu.
(3) Enter "a:\setup" in the [Open] box in the [Run] dialog. Then, click the <OK>
(4) Click the <Next> button in the [Welcome to the InstallShield Wizard for SPEL]
(5) Confirm that the destination folder is "c:\PSPELWORK\" in the [Choose Destination
(6) Select the "Install to Control Unit" in the [Setup Type] dialog. Then, click the
(7) Check the [Help] and [Spel other Modules] check boxes in the [Setup Type / Select
(8) Select the <850MHz> option button in the [Setup Type / Select CPU clock of Control
(9) Check the [Add SPEL into StartUp] and [Add SPEL into Start Menu] check boxes in
(10) Click the <Next> button in the [Start Copying Files] dialog.
(11) When the [Setup Needs The Next Disk] dialog appears, set the required disk in the
(12) Set each item in the [MIB] panel in the [SPEL Hardware Settings] dialog as shown
(13) After the [Install Wizard Complete] dialog appears, remove the SPEL CT Setup Disk
(14) Select the <Yes, I want to restart my computer now.> option button in the dialog.
RC520 Rev.7
button.
dialog.
Location] dialog. Then, click the <Next> button.
<Next> button.
Install Modules] dialog, and click the <Next> button.
Unit] dialog. Click the <Next> button.
the [Setup Type / Select install options] dialog. Then, click the <Next> button.
FDD and click the <OK> button. (Repeat this step for all the SPEL CT Setup
Disks.)
below. Then, click the <OK> button.
No.
Current
1
Checked
from the FDD.
Then, click the <Finish> button.
Maintenance 8. Recovering the HDD
Manipulator
I/O Address
Not Assigned
Memory Address
300
D8000
191