Table of Contents
Advertisement
34 | Commissioning (for single application)
5
Commissioning (for single application)
8
1
2
3
4
Fig. 50
No .
Description
1
ON/OFF power switch
2
Reset button
3
Menu button
4
ESC button
5
PC service connection
6
OK button
7
UP/DOWN/LEFT/RIGHT button
8
Display
5 .1
Switching the appliance ON/OFF
Switch the appliance ON using the ON/OFF switch. The display will
appear as follow:
1
70.0°F
DHW Setpoint
Fig. 51
In the left of the display is shown the external temperature 1 (if connected
to an outdoor sensor).
In the right of the display is shown the set setpoint value 2.
In the top right side is displayed the time 3.
To switch off the appliance use the ON/OFF switch.
6720818456 (2018/06) US
7
5
6
04:29 pm
2
3
120.0°F
5 .2
Setting date and time
Press the "menu" button and select "Settings" using the UP/DOWN
button.
Menu
Domestic Hot Water
Information
Settings
System Test
Fig. 52
Press the "OK" button and select "General Settings" using the UP/DOWN
button.
Settings
General Settings
Boiler Settings
Fig. 53
Press the "OK" button and select "Date & Time" using the UP/DOWN
button.
General Settings
Language
Unit type
Date & Time
Other settings
Fig. 54
Press the "OK" button. The display will appear as follow:
Date & Time
Date:
Time:
Time Zone Settings
Display Settings
Fig. 55
Press the "OK" button to highlight the values. The values can be changed
using the "UP/"DOWN" keys. When the value entered is correct then
press "OK" to insert the next value.
Sun 10/25/2015
03:02 pm
SSB
Advertisement
Table of Contents
