Troubleshooting - Parkside PCM 62 A1 Operating And Safety Instructions Manual

Old devices must not be disposed of with household waste!
This symbol indicates that this product must not be disposed of together with domestic waste in compliance with the Directive (2012/19/
EU) pertaining to waste electrical and electronic equipment (WEEE). This product must be handed over at the intended collection point.
This can be done, for example, by returning it when purchasing a similar product or delivering it to an authorised collection point for the
recycling of old electrical and electronic devices. Improper handling of waste equipment may have negative consequences for the envi-
ronment and human health due to potentially hazardous substances that are often contained in electrical and electronic equipment. By prop-
erly disposing of this product, you are also contributing to the effective use of natural resources. You can obtain information on collection points
for waste equipment from your municipal administration, public waste disposal authority, an authorised body for the disposal of waste electrical
and electronic equipment or your waste disposal company.

17. Troubleshooting

Fault
Motor does not start
Engine switches off
Engine runs, drum stands still
10 GB/IE
Possible cause
No mains voltage
Connection cable missing
Engine overloaded
Supply and exhaust air openings on the motor unit
are contaminated
V-belt slipping
Remedy
Check the safeguard
Have checked or replaced by an electrician
Let the engine cool down
Clean supply and exhaust air openings
Replace V-belt