Furuno MU-192HD Operator's Manual page 24

1. MOUNTING, WIRING
3. Attach the hanger bracket 19 assembly to the rear of the display unit with the washer head
screws (9 places).
4. Connect all cables at the back of the display unit. See section 1.7.
5. Loosen the knobs of the bracket support and set them in the notches on the hanger 19 as-
sembly.
Hanger 19 Assembly
6. Adjust the angle of the display unit and fix the knobs tightly.
Washer Head Screw
Hanger Bracket 19 Assembly
Knob
15