Furuno MU-192HD Operator's Manual page 14

1. MOUNTING, WIRING
6. Screw the butterfly bolts and the butterfly nuts of the mount metal so that the protector moves
to the mounting plate.
Flush Mount Fixture 19
Flush Mount Fixture 19
7. Fasten the flush mount fixture 19 to the right and left sides of the rear of the display unit with
the washer head screws (6 places).
Washer Head Screw
Wall thickness is 3 mm to 14 mm
Wing Nut
Wing nut
Set to the fixture.
Wall thickness is 14 mm to 25 mm
Wing Nut
Set to the fixture.
Mount Metal 19
5
Wing Bolt
Mounting Plate
Protector
Wing Bolt
Mounting Plate
Protector