HP ZBOOK STUDIO 16 G10 Maintenance And Service Manual page 68

i. Detach the sensor board (5) from the display back cover. The sensor board is attached to the
display back cover with double-sided adhesive.
j. Remove the sensor board.
The sensor board is available using spare part number N10918-001.
19. To remove the hinges:
a. Remove the display assembly.
b. Remove the display bezel.
c. Remove the display panel assembly.
d. Remove the six Phillips M2.5 × 6. 1 screws (1) that secure the hinges to the display panel
assembly.
e. Remove the hinges (2).
The hinges are available using spare part number N10932-001.
To reassemble and replace the display assembly, reverse the removal procedure.
Display assembly 61