HP ZBOOK STUDIO 16 G10 Maintenance And Service Manual page 50

Table 5-2 Solid-state drive descriptions and part numbers (continued)
Description
2 TB, M.2 2280, PCIe-4×4, NVMe solid-state drive with TLC
1 TB, M.2 2280, PCIe-4×4, NVMe solid-state drive with TLC
1 TB, M.2 2280, PCIe-4×4, NVMe, SED solid-state drive with TLC
512 GB, M.2 2280, PCIe-4×4, NVMe solid-state drive with TLC
512 GB, M.2 2280, PCIe-4×4, SED solid-state drive with TLC
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
Remove the solid-state drive:
1. Disconnect the battery cable from the system board.
2. Remove the two Phillips M2.0 × 3.2 screw (1) that secures the solid-state drive and solid-state drive
shield to the system board.
3. Lift and remove the solid-state drive shield (2).
The solid-state drive shield is included in the Shield Kit, spare part number N10942-001.
Preparation for disassembly on page
Bottom cover on page 40).
Spare part number
M52027-002
M16560-002
N23415-002
M17436-002
M52031-002
40).
Solid-state drive 43