HP ZBOOK STUDIO 16 G10 Maintenance And Service Manual page 52

Table 5-3 Bottom speakers description and part number
Description
Bottom speakers (included in the Speaker Kit, spare part number N51007-001; includes left and right top speakers, left and right
bottom speakers, cables, and 4 rubber isolators)
Before removing the bottom speakers, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
Remove the bottom speakers:
1. Disconnect the battery cable from the system board.
2. Disconnect the bottom speaker cables (1) from the system board.
3. Remove the four Phillips M2.0 × 2.4 broadhead screws (2) that secure the bottom speakers to the
computer.
4. Remove the bottom speakers (3) from the computer.
When removing the bottom speakers, make note of the location of the four rubber isolator
locations (4). The absence of or damage to these isolators can result in degraded speaker
performance.
Preparation for disassembly on page
Bottom cover on page 40).
Spare part number
40).
Bottom speakers 45