IBM 2073-700 Quick Installation Manual page 53

Table 8. This table (optional) is useful for identifying the IP addresses and information
necessary to set up the initialization tool. The table entries serve as a guide only. Fill in the
Value column with your system information. (continued)
Field
DNS domain name
DNS search domain
Network Time Protocol
(NTP) server
Alternate NTP server
E-mail server IP address
1. Locate the USB key that was shipped with your order in the documentation
package. Use the USB key that was shipped with the file modules, not the USB
key that was shipped with the control enclosure.
Note: You might encounter a problem where the code cannot be run if you use
your own USB key. The USB key that you use must:
v Contain a FAT32 formatted file system on its first partition. NTFS and other
filesystem types are not supported.
v Contain a copy of the Microsoft Windows USB key InitTool.exe executable
that is located in the root directory of the file system.
v Be write enabled.
2. Insert the USB key into a USB port in a personal computer that is running
Microsoft Windows XP Professional or higher.
Start the initialization tool.
If the system is configured to autorun for USB keys, the initialization tool starts
automatically. Otherwise, open the USB key from My Computer and
double-click the InitTool.exe.
Value
Chapter 3. Configuring the system
Notes
Domain name for user
network (such as
customer.com)
Additional domain names to
be used with primary
domain name (such as
a.customer.com or
us.customer.com)
Site NTP server address
Alternate NTP server, if
applicable
Customer internal e-mail
server
43