Troubleshooting - AEG CKB64100BW User Manual

Table of Contents

Advertisement

3. Put a cloth on the bottom of the
cavity.
The back lamp
1. Turn the lamp glass cover to remove
it.

14. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
14.1 What to do if...
Problem
There is no spark when you
try to activate the spark gen‐
erator.
The flame extinguishes im‐
mediately after ignition.
The flame ring is uneven.
The burners do not work.
The flame colour is orange
or yellow.
The oven does not heat up.
The lamp does not operate.
2. Clean the glass cover.
3. Replace the lamp with a suitable
300 °C heat-resistant lamp.
4. Install the glass cover.
Possible cause
The hob is not connected to
an electrical supply or it is
connected incorrectly.
The fuse is blown.
Burner cap and crown are
placed incorrectly.
Thermocouple is not heated
up sufficiently.
Burner crown is blocked with
food residues.
There is no gas supply.
The oven is deactivated.
The necessary settings are
not set.
The lamp is defective.
ENGLISH
Remedy
Check if the hob is correctly
connected to the electrical
supply. Refer to the connec‐
tion diagram.
Make sure that the fuse is
the cause of the malfunction.
If the fuse is blown again
and again, contact a quali‐
fied electrician.
Place the burner cap and
crown correctly.
After lightning the flame,
keep the spark generator ac‐
tivated for equal or less than
10 seconds.
Make sure that the injector is
not blocked and the burner
crown is clean.
Check the gas connection.
The flame can look orange
or yellow in some areas of
the burner. This is normal.
Activate the oven.
Make sure that the settings
are correct.
Replace the lamp.
27

Advertisement

Table of Contents
loading

Table of Contents