BenQ W1800 User Manual page 43

Operation
Settings
Security
Settings
Factory Default
Reset System
• Reminder Message
Sets the reminder messages on or off.
• LED Indicator
You can turn off the LED warning lights. This is to avoid any light disturbance
when viewing images in a dark room.
• Power On/Off Settings
• Direct Power On: Allows the projector to turn on automatically once the
power is fed through the power cord.
• Auto Power Off: Allows the projector to turn off automatically if no input
signal is detected after a set period of time to prevent unnecessary waste of
light source life.
• BenQ HDMI Media Streaming (QS01)
With the optional QS01 installed on your projector (see
HDMI Media Streaming (Optional) on page
functions related to the Android TV dongle (QS01), including:
• the reminder for plugging in ATV dongle.
• the handshaking mechanism between the Android TV dongle and projector
after power-on.
• Panel Key Lock
With the control keys on the projector locked, you can prevent your projector
settings from being changed accidentally (by children, for example). When the
Panel Key Lock is on, no control keys on the projector will operate except
POWER.
To release panel key lock, press and hold
remote control for 3 seconds.
If you turn off the projector without disabling panel key lock, the projector will still be in locked
status the next time it is turned on.
• Change Password/Power On Lock
See Utilizing the password function on page 25.
Returns all settings to the factory preset values.
The following settings will still remain: Projector Position, 3D Keystone, Auto Vertical
Keystone, High Altitude Mode, Baud Rate, Light Source Information, BenQ HDMI
Media Streaming (QS01), Security Settings.
Returns all the settings on the System main menu to the factory default valuess.
The following settings will still remain: Light Source Information, BenQ HDMI Media
Streaming (QS01), Security Settings.
Installing the QS01
19), you can select On to enable
(the right key) on the projector or
Menu operation 43