BenQ W1800 User Manual page 30

Function descriptions
Menu
Picture Mode
Fast Mode
30 Menu operation
The projector is preset with several predefined picture modes so that you can
choose one to suit your operating environment and input signal picture type.
• Bright
Maximizes the brightness of the projected image. This mode is suitable for
environments where extra-high brightness is required, such as using the projector
in well lit rooms.
• Living Room
With well-saturated color, fine-tuned sharpness, and a higher brightness level, this
mode is suitable for TV streaming in rooms where there is a small amount of
ambient light, e.g. your living room.
• Sports
With well-saturated colors and higher brightness level, this mode is best for
watching sporting events in a bright room.
• FILMMAKER MODE
This mode is best for watching movies with accurate color and deepest contrast
at lower brightness level in rooms with a bit of ambient light, as if in a commercial
cinema.
• 3D
Optimized to bring up 3D effects when watching 3D contents.
This mode is only available when 3D function is enabled.
•
FILMMAKER MODE HDR
Delivers High Dynamic Range effects with higher contrasts of brightness and
colors for HDR Blu-ray movies or HDR games. This mode is best for displaying
movies with HDR10 contents.
• HLG
Delivers High Dynamic Range effects with higher contrasts of brightness and
colors. Picture Mode will be switched to HLG automatically while detecting
metadata or EOTF info from HLG streaming contents.
• User
Recalls the settings customized based on the current available picture modes. See
User Management on page
Minimizes the response time between the input source and the displayed image.
For the optimized latency, when Fast Mode is activated, 3D Keystone/Aspect
Ratio will return to the default settings, and Auto Vertical Keystone will be
turned off automatically.
*Fast Mode can only be enabled for below input timing adopted by most of
popular games:
- 1080p 60Hz/120Hz/240Hz
- 4K 60Hz
Descriptions
29.