The Setup Wizard screenshots below are for reference only and may differ from the actual design.
Step 1:
Specify Projector Position.
For more information about projector position, see
Choosing a location on page
Step 2:
Specify OSD Language.
Step 3:
Specify 3D Keystone.
If the projected image is distorted due to an angled
projection, perform the following steps to correct the
projected image shape.
• Press
/
Selecting V corrects the vertical sides keystone.
Selecting H corrects the horizontal sides
keystone.
Selecting R rotates the projected images
clockwise or counterclockwise.
• Press
/
When done, press OK to proceed to the next step.
For more information about keystone, see
keystone on page
4. If you are prompted for a password, press the arrow keys to enter a 6-digit password. See
the password function on page
20
Operation
12.
to select V, H, or R.
to adjust its value.
16.
25.
Correcting
Utilizing