Table of Contents
Advertisement
Preset Synchronization
To transfer saved preset options from one Maverick Force 1 Spot to another:
1. Connect the Maverick Force 1 Spot products to receive the preset options by a DMX daisy chain.
2. Make the Maverick Force 1 Spot with the preset options to transfer be the first fixture in the DMX
daisy chain.
3. Power on all of the products.
4. Set all of the products to a
5. On the Maverick Force 1 Spot with the preset options, go to the Settings main level.
6. Select the Preset Sync option.
7. Select NO (to cancel) or YES (to transfer the preset options to the connected products).
•
All menu configurations are transferred except for the IP address.
•
ONLY connect Maverick Force 1 Spot products for this function!
USB Update
To enable or disable software update using USB:
1. Go to the Settings main level.
2. Select the USB Update option.
3. Select NO (disables software update through USB) or YES (enables software update through USB).
See the
USB Software Update
Maverick Force 1 Spot software using the USB flash drive.
Reset Function
To reset specific functions or the entire product:
1. Go to the Settings main level.
2. Select the Reset Function option.
3. Select the functions to reset, from Pan/Tilt, Iris/Prism, Color/CMY, Gobo/Gobo Rotate, Frost/
Animation, or All.
4. Select NO (to cancel) or YES (to reset the selected functions).
Factory Reset
To reset the product to factory default settings:
1. Go to the Settings main level.
2. Select the Factory Reset option.
3. Select NO (to cancel) or YES (to reset the product configuration to default factory settings).
Test Mode
Auto Test
To have the Maverick Force 1 Spot automatically test all functions one after the other:
1. Go to the Test main level.
2. Select the Auto Test option.
Manual Test
To manually test an individual function of the Maverick Force 1 Spot:
1. Go to the Test main level.
2. Select the Manual Test option.
3. Select a function to test. (Available functions are: Pan, Pan Fine, Tilt, Tilt Fine, P/T Speed,
Dimmer, Dimmer Fine, Shutter, Virtual Shaking, Cyan, Magenta, Yellow, CTO, Color, Gobo,
Gobo Rotate, Gobo Index, Gobo2, Animation, Animation Rotate, Focus, Focus Fine, Focus
Auto, Zoom, Zoom Fine, Prism, Prism Rotate, Iris, Frost, CMY Macro, CMY Macro Speed,
and Special Function)
4. Increase or decrease the value of the selected function from 000–255 to test it.
22
Control Mode
other than WDMX (i.e., DMX, ArtNet, or sACN).
section for the detailed instructions on how to update the
Maverick Force 1 Spot User Manual Rev. 7
Operation
Advertisement
Table of Contents
