Specifications; Stability Ratings - Toro 23163 Operator's Manual

Specifications

Note: Specifications and design are subject to change without notice.
Width
Length
Transport height
Weight
Digging depth (maximum)
Bucket rotation
Swing arc
Stabilizer spread (working)

Stability Ratings

To determine the degree of slope you can traverse with the
backhoe installed on a traction unit, find the stability rating
for the hill position you want to travel in the following
table, then find the degree of slope for the same rating and
hill position in the Stability Data section of the traction unit
operator's manual.
Warning
Exceeding the maximum recommended slope can
cause the traction unit to tip, crushing you or
bystanders.
Do not drive the traction unit on a slope steeper
than the maximum recommended slope, as
determined in the following table and the traction
unit operator's manual.
34.5 inches (87.6 cm)
41 inches (104 cm)
71 inches (180 cm)
762 lbs (346 Kg)
82 inches (208 cm)
180 degrees
180 degrees
78 inches (198 cm)
Orientation
Front Uphill
Rear Uphill
Side Uphill
Important
platform, the counterweight must be used on the platform
while using the backhoe, or the traction unit will become
unstable.
6
Stability Rating
C
D
C
If your traction unit has a rear operator's