Table of Contents
Advertisement
Charging the Device
This device contains a lithium-ion battery. See the Important Safety and Product Information guide in the product
box for product warnings and other important information.
To prevent corrosion, thoroughly clean and dry the contacts and the surrounding area before charging or
connecting to a computer. Refer to the cleaning instructions in the appendix.
1 Plug the small end of the USB cable into the charging port on your device.
2 Plug the large end of the USB cable into a USB charging port.
3 Charge the device completely.
Tips for Charging Your Device
• Connect the charger securely to the device to charge it using the USB cable
You can charge the device by plugging the USB cable into a Garmin approved AC adapter with a standard wall
outlet or a USB port on your computer.
• View the remaining battery graphic on the device information screen
Device Care
Avoid extreme shock and harsh treatment, because it can degrade the life of the product.
Do not use a sharp object to clean the device.
Never use a hard or sharp object to operate the touchscreen, or damage may result.
Avoid chemical cleaners, solvents, and insect repellents that can damage plastic components and finishes.
Thoroughly rinse the device with fresh water after exposure to chlorine, salt water, sunscreen, cosmetics,
alcohol, or other harsh chemicals. Prolonged exposure to these substances can damage the case.
Do not place in high temperature environments, such as a clothes dryer.
Do not store the device where prolonged exposure to extreme temperatures can occur, because it can cause
permanent damage.
24
Device Information
WARNING
NOTICE
NOTICE
(Charging the Device,
(Viewing Device Information,
page 24).
page 25).
Device Information
Advertisement
Table of Contents
