JRC JMA-5312-6HS Installation Manual page 44

All manuals and user guides at all-guides.com
2) Setting of baud rate
1) Press and hold [RADAR MENU] key.
The Code Input menu will appear.
2) Press the [0] key, and put the cursor on the
The Serviceman Menu will appear.
3) Open the Baud Rate menu by performing the following menu operation.
2. Installation Menu
→ 5. COM Port Setting
→ 1. Baud Rate
4) Press [1] key.
Select the baud rate of 1. COMPASS .
4800bps and 38400bps are available. But connecting with 4800bps decreases the performance
of signal process and target tracking.
3) Select the heading device
Press the heading device switching button and select CMPS .
Heading device
switching
ENT button, and press the [ENT] key.
3-15