Troubleshooting; Required Equipment - UNI-T UTS1000 Series Service Manual

Spectrum analyzers
Hide thumbs Also See for UTS1000 Series:
Table of Contents

Advertisement

Service Manual
6. Trouble-shooting
Service level
This section contains information and procedures to help you determine if a power failure is an instrument
problem. If the power fails, the instrument needs to be sent back to the Uni-Tech service center for repair,
because other internal electronic components or modules cannot be replaced by the user.
Frequently Asked Questions
Use the following table to help isolate possible failures. The following table lists problems and possible
causes. This list is not exhaustive, but it can help eliminate quick-fix issues, such as a loose power cord. For
more detailed troubleshooting, see Trouble-shooting Flowchart
Symptoms
The instrument cannot be powered on
The instrument is powered on, but the fans
are not running
The display is blank or there are streaks in
the display

Required equipment

Digital voltmeter for checking mains voltage.
Anti-static working environment.
Instruments.uni-trend.com
Possible reason
Power cord not plugged in
Electricity failure
Defective Micro-controller Components
Faulty fan power cable
Fan power cable not connected to circuit board
fan failure
electricity failure
One or more defective load regulator points
• Display or display circuit failure.
UTS1000/3000 Series
23 / 25

Advertisement

Table of Contents
loading

Table of Contents