Table of Contents
Advertisement
3.
For Workman MD/MDE machines: Connect
the ring terminal on the harness to the grounding
block and insert the fuse-block connector and
the fuse (30 A) into an available fuse-block
connection
(Figure
Note:
If there is not an available fuse-block
connection, you need to add a fuse block to the
fuse-block grouping. Contact your authorized
Toro distributor for more information.
Figure 14
1. Ground block
2. Ring terminal
Workman MDE only:
A.
Connect the power-adapter harness to the
wire harness
B.
Connect the power-adapter harness and
the ground-adapter harness to the wire
harness from the 12 V Plug Adapter Kit.
14).
3. Fuse block
(Figure
15).
1. Ring terminal
2. Ground-adapter harness
3. Wire harness
4.
Connect the battery and lower the bed; refer to
the Operator's Manual.
g027556
12
Figure 15
4. Power-adapter harness
5. Wire harness from the 12
V Plug Adapter Kit
g416744
Advertisement
Table of Contents
