Ip Dhcp Snooping Database Flash; Show Ip Dhcp Snooping - SMC Networks TigerSwitch SMC6128L2 Management Manual

Example
Console(config)#ip dhcp snooping information policy drop
Console(config)#

ip dhcp snooping database flash

This command writes all dynamically learned snooping entries to flash
memory.
Command Mode
Global Configuration
Command Usage
This command can be used to store the currently learned dynamic
DHCP snooping entries to flash memory. These entries will be restored
to the snooping table when the switch is reset. However, note that the
lease time shown for a dynamic entry that has been restored from flash
memory will no longer be valid.
Example
Console(config)#ip dhcp snooping database flash
Console(config)#

show ip dhcp snooping

This command shows the DHCP snooping configuration settings.
Command Mode
Privileged Exec
DHCP S
NOOPING
C
OMMANDS
4-277