Igmp Filtering And Throttling Commands - SMC Networks TigerSwitch SMC6128L2 Management Manual

C L
OMMAND INE

IGMP Filtering and Throttling Commands

In certain switch applications, the administrator may want to control the
multicast services that are available to end users. For example, an IP/TV
service based on a specific subscription plan. The IGMP filtering feature
fulfills this requirement by restricting access to specified multicast services
on a switch port and IGMP throttling limits the number of simultaneous
multicast groups a port can join.
Table 4-69 IGMP Filtering and Throttling Commands
Command
ip igmp filter
ip igmp profile
permit, deny
range
ip igmp filter
ip igmp max-groups Specifies an IGMP throttling number for
ip igmp max-groups
action
show ip igmp filter
show ip igmp
profile
show ip igmp
throttle interface
4-242
I
NTERFACE
Function
Enables IGMP filtering and throttling on
the switch
Sets a profile number and enters IGMP
filter profile configuration mode
Sets a profile access mode to permit or
deny
Specifies one or a range of multicast
addresses for a profile
Assigns an IGMP filter profile to an
interface
an interface
Sets the IGMP throttling action for an
interface
Displays the IGMP filtering status
Displays IGMP profiles and settings
Displays the IGMP throttling setting for
interfaces
Mode Page
GC 4-243
GC 4-244
IPC 4-244
IPC 4-245
IC 4-246
IC 4-247
IC 4-248
PE 4-248
PE 4-249
PE 4-250