Figure 3-83. Configuring Class Of Service - SMC Networks TigerSwitch SMC6128L2 Management Manual

Web – Click Priority, Traffic Classes. Assign priorities to the traffic classes
(i.e., output queues), then click Apply.

Figure 3-83. Configuring Class of Service

CLI – The following example shows how to change the CoS assignments
to a one-to-one mapping.
Console(config)#interface ethernet 1/1
Console(config-if)#queue cos-map 0 0
Console(config-if)#queue cos-map 1 1
Console(config-if)#queue cos-map 2 2
Console(config-if)#exit
Console(config)#exit
Console#show queue cos-map ethernet 1/1
Information of Eth 1/1
CoS Value :
Priority Queue: 0 1 2 1 2 2 3 3
. .
.
Note: Mapping specific values for CoS priorities is implemented as an
interface configuration command, but any changes will apply to
the all interfaces on the switch.
0 1 2 3 4 5 6 7
C S
LASS OF ERVICE
C
ONFIGURATION
4-144
4-223
4-225
3-189