9.5.12 WLAN adapter
EPRA14~18DAV3+W1 + ETVZ16S18+23DA6V+9W
Daikin Altherma 3 H HT F
4P587503-1A – 2020.01
INFORMATION
Restriction: WLAN adapter settings are only visible when a WLAN adapter is
installed.
Overview
The following items are listed in the submenu:
D
User profile
Operation
Wireless gateway
Malfunctioning
Room
About the WLAN adapter
The wireless LAN adapter connects the heat pump system to the internet. The user
can then control the heat pump system via the Daikin Residential Controller app.
This needs the following components:
a
a
WLAN adapter
b
Router
c
Smartphone + app
Configuration
To configure the Daikin Residential Controller app, follow the in-app instructions.
While doing this, the following actions and information are needed on the user
interface of the indoor unit:
Mode: Turn AP mode ON (= WLAN adapter active as access point) or OFF.
[D] Wireless gateway
[D.1] Mode
[D.2] WPS
[D.3] Reset
[D.4] Device info
b
c
The WLAN adapter needs to be installed by the
installer on the indoor unit (on the inside of the
front panel). See:
▪
Installation manual of the WLAN adapter
▪
Addendum book for optional equipment
Field supply.
The Daikin Residential Controller app needs to be
installed on the user's smartphone. See:
http://www.onlinecontroller.daikineurope.com/
9
Configuration
|
Installer reference guide
185