Key - SMC Networks EliteConnect SMC2891W-AG User Manual

7
Command Line Interface

key

This command sets the keys used for WEP encryption. Use the no form to delete a
configured key.
Syntax
key <index> <size> <type> <value>
no key index
• index - Key index. (Range: 1-4)
• size - Key size. (Options: 64, 128, or 152 bits)
• type - Input format. (Options: ASCII, HEX)
• value - The key string.
- For 64-bit keys, use 5 alphanumeric characters or 10 hexadecimal digits.
- For 128-bit keys, use 13 alphanumeric characters or 26 hexadecimal
digits.
- For 152-bit keys, use 16 alphanumeric characters or 32 hexadecimal
digits.
Default Setting
None
Command Mode
Interface Configuration (Wireless)
Command Usage
• To enable Wired Equivalent Privacy (WEP), use the auth shared-key
command to select the "shared key" authentication type, use the key
command to configure at least one key, and use the transmit-key
command to assign a key to one of the VAP interfaces.
• If WEP option is enabled, all wireless clients must be configured with the
same shared keys to communicate with the access point.
• The encryption index, length and type configured in the access point must
match those configured in the clients.
Example
SMC AP(if-wireless g)#key 1 64 hex 1234512345
SMC AP(if-wireless g)#key 2 128 ascii asdeipadjsipd
SMC AP(if-wireless g)#key 3 64 hex 12345123451234512345123456
SMC AP(if-wireless g)#
Related Commands
key (7-124)
encryption (7-123)
transmit-key (7-125)
7-124