Table of Contents
Advertisement
4) Fix the power cord with wire-fixing clamp.
5) Take off the cable cross loop that is attached to the mode exchanger, as shown in Fig.5.5~5.8.
Replace with a local cable cross bushing.
One-to-one Cooling and Heating Mode Exchanger
One-to-two Cooling and Heating Mode Exchanger
One-to-four Cooling and Heating Mode Exchanger
Cooling and Heating Recovery Mode Exchanger
Fig. 5.4
Fig.5.5
Fig.5.6
Fig.5.7
28
Advertisement
Table of Contents
