Table of Contents
Advertisement
Cooling and Heating Recovery Mode Exchanger
5.2 Connect Power Cord
NOTICE ！ The mode exchanger in the same system must be supplied power uniformly.
Remark: The maximum quantity "n" of indoor unit is decided by the capacity of indoor unit, please
refer to capacity of unit.
(1) Use single-phase power air conditioner
1) Remove electric box cover of indoor unit.
2) Pass the power cord through rubber ring.
3) Connect power cord to "L1，L2" terminal and earthing screw. Please use the green bonding
screw to connect the earthing cord.The location is showing in the Fig 5.4
Fig. 5.3
27
Advertisement
Table of Contents
