Mitsubishi Electric FR-D720-070 Instruction Manual page 74

Parameter list
Func-
Parameter Name
tion
Pr.CL Parameter clear 0, 1
ALLC All parameter clear 0, 1
Er.CL Faults history clear 0, 1
Pr.CH Initial value change list —
∗1
Differ according to capacities.
6%: FR-D720-042 or less, FR-D740-022 or less, FR-D720S-042 or less
4%: FR-D720-070 to 165, FR-D740-036 to 080, FR-D720S-070 and 100
3%: FR-D720-238 and 318, FR-D740-120 and 160
∗2 Differ according to capacities.
5s: FR-D720-165 or less, FR-D740-080 or less, FR-D720S-008 to 100
10s: FR-D720-238 and 318, FR-D740-120 and 160
∗3
Differ according to capacities.
6%: FR-D720-008 and 014, FR-D720S-008 and 014
4%: FR-D720-025 or more, FR-D740-012 or more, FR-D720S-025 or more
∗4
Write is disabled in the communication mode (network operation mode) from the PU connector.
∗5 The initial value differs according to the voltage class. (200V class, 400V class)
∗6 The parameter number in parentheses is the one for use with the operation panel (PA02) for the FR-E500 series or parameter unit (FR-PU04/FR-PU07).
∗7
These parameters are communication parameters that are not cleared when parameter clear (all clear) is executed from RS-485 communication. (Refer to
page 180 for RS-485 communication)
∗8
Available only for the three-phase power input specification model.
68
Minimum Refer
Initial Customer
Setting Range Setting to
Value Setting
Increments Page
1 0 242
1 0 242
1 0 244
— — 243
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Instruction Code
Parameter Remarks
Read Write Extended
Pr.CL — — —
ALLC — — —
Er.CL — — —
Pr.CH — — —
Parameter list
Control Mode-based
Parameter
Correspondence Table
Copy Clear All clear
V/F V/F V/F GP MFVC GP MFVC GP MFVC
— — — — —
— — — — —
— — — — —
— — — — —
4