Table of Contents
Advertisement
Recording a TV program (continued)
Playing back the portion you just
recorded – One-Touch Playback
OK
i/MENU
j
k-
ONE-TOUCH
PLAYBACK
Using One-Touch Playback after ShowView system (page
20) or timer recording (page 22) is convenient. You can play
back only the portion you just recorded by pressing a single
button later.
1
Stop recording (when recording without timer).
The ONE-TOUCH PLAYBACK button on the VCR lights.
If another operating button is pressed after you stop
recording, One-Touch Playback will be canceled.
2
Press ONE-TOUCH PLAYBACK on the VCR or
OTPB on the remote control.
The tape rewinds to the start of the recorded portion and
begins playback.
When you set the timer for more than two
timer programs
The VCR starts playing back from the earliest one when you
use One-Touch Playback.
Note
One -Touch Playback does not work for recordings of less than
1 minute.
18
ENGLISH
OTPB
i+
l
Recording NICAM/A2 stereo
and bilingual programs
This VCR receives and records stereo and bilingual
programs in NICAM/A2 system automatically.
When the VCR receives stereo, "STEREO" appears on the
TV screen.
If the broadcast is bilingual, "BIL" appears on the TV screen.
When recording NICAM/A2 stereo and
bilingual programs
NICAM/A2 broadcasts are recorded according to the
following table:
Track
Stereo
Hi-Fi audio
Left channel
Left channel
Hi-Fi audio
Right channel
Right channel
Normal audio
Standard (usually
(mono)
the mixed sound
of the left and
right channels)
To select the sound when playing back a
NICAM/A2 - recorded tape
See "Selecting stereo or bilingual sound" on page 14.
To select the standard sound when
NICAM sound has noise or you want to
record standard sound regardless of the
broadcast type
Press i/MENU and select NIC by pressing j or l, then
press OK. Press i+ or k- to select OFF.
(You can also return to the menu by pressing j or l.)
REC
f OSD
ON
AUDIO
OFF
Press i/MENU to return to the normal screen.
Notes
• You cannot select NIC when the VCR is in AV1, AV2 or AV3
mode.
• When you set NICAM to OFF, the sound is always output in
mono.
Sound recorded
Bilingual
Main sound
Sub sound
Standard (usually
the main sound)
AUTO
TIME
SYS-
OFF
DATE
TEM
OSD
NIC
NIC
OPR
Advertisement
Table of Contents
