Table of Contents
Advertisement
Recording with One–Touch
Recording
You can immediately start recording the current channel for
a specified time with One-Touch Recording.
a PAUSE/
FRAMEF
Before setting the Recording
• Turn on the TV and set the TV for VCR reception.
- When the VCR and TV are connected with a 21-pin scart
cord, set the TV to the AV mode.
- When they are connected with only the antenna cord, set
the TV to the video output channel.
• Insert a cassette with its erasure prevention tab in place.
Make sure the tape has sufficient recording time.
• Select the channel position to record and tape speed.
1
Press w REC.
The VCR starts recording.
2
Press w REC repeatedly to set the recording
duration.
Each press changes the recording duration on the
display window and the TV screen in the following way:
REC
VCR
SP
LP EP
0H30 l 1H00 l 1H30 l ... l 8H30
i
regular recording j 9H00 j
The recording time indicator on the display window
counts down to "0H00".
The recording stops at "0H00" and the VCR turns off.
l /6
s STOP
w REC
Hi-Fi
M
REM BILSAP
ST
To stop, pause, or turn off the power
while recording
Press s STOP, a PAUSE/FRAMEF or l /6.
To extend the recording duration while
recording
Press w REC until the new duration you want appears on
the display window.
Note
During One-Touch Recording, when the tape reaches the end,
VCR turns off and "TIMER" flashes on the display window.
19
ENGLISH
Advertisement
Table of Contents
