Table of Contents
Advertisement
z
C PLAY
f REW/[
a PAUSE/
FRAME F
CH/TRACKING k-
If you cannot get a clear playback
picture
Although the VCR adjusts the tracking automatically, you
may need to adjust the tracking manually if the tape quality
is too poor.
While the VCR is adjusting the tracking automatically,
"A-tr" flashes on the display window. It goes off after the
adjustment is complete.
REC
TIMER VCR
SP LP EP
If the picture and the sound have noise, try manual tracking.
To adjust the tracking manually
During playback, press CH/TRACKING i+ or k-
repeatedly until you get the best possible picture.
(Automatic Tracking is canceled.)
To return to the automatic tracking
Press AUTO-TRACKING.
Note
"A-tr" does not appear while playing back unrecorded portions
of the tape.
l /6
AUTO TRACKING
CM SKIP
g F FWD/]
s STOP
CH/TRACKING i+
Hi-Fi
M
REM BILSAP
ST
Additional functions
To
Press
Make a
a PAUSE/FRAME F
picture still
during playback
Fast-forward
g F FWD/] during
the tape
stop
Rewind the
f REW/[
tape
Eject the
z
cassette
Search
g F FWD /] during
forward
playback
Search
f REW /[ during
reverse
playback
Play frame-
a PAUSE/FRAME F
by-frame
repeatedly during still
To watch the picture of a tape during fast-
forward or rewind – Skip search
Hold down g F FWD/] or f REW/[ during fast-
forward or rewind. The VCR switches forward or reverse
search.
Release the button to return to the fast-forward or rewind
mode.
To skip an advertisement
Press CM SKIP during playback. The VCR searches
forward approximately 30 seconds of the recorded time.
Each press changes the recorded time of forward search in
30 seconds increments to a maximum of 3 minutes.
After forward search, VCR returns to the normal playback.
During CM skip, the counter does not register blank portions
with no recorded signal.
To turn off automatically after rewinding
Press l /6 during rewind. "REW" flashes on the TV screen.
The VCR turns the power off after rewinding the tape to the
beginning.
Tips
• You can eject the cassette by pressing z during power off.
(This does not work during Power Save mode.)
• You can adjust unstable pictures during still by pressing CH/
TRACKING i+ or k- repeatedly.
• Depending on the tape, noise lines may appear or color may
fade during still, forward and reverse searches.
You can move the noise lines during forward and reverse
searches by pressing CH/TRACKING i+ or k-
repeatedly.
Notes
• If a still picture lasts for more than 5 minutes, the VCR will
automatically enter stop mode to protect the tape.
• If forward and reverse searches last for more than 3 minutes,
the VCR will automatically enter playback mode to protect
the tape.
• The sound will be muted during forward and reverse
searches, and still.
To return to the
original mode
Press C PLAY.
Press s STOP.
Press s STOP.
—
Press C PLAY.
Press C PLAY.
Press C PLAY.
CONTINUE
13
ENGLISH
Advertisement
Table of Contents
