Master Mistral Compact Manual page 12

ward automatic manouvre. The yellow led switch on indicates that the conditions
describes are all verificated and than in the exit from wind alarm will execute a
downward automatic manouvre. Is posible activate/desactivate the "automatic
downward" function using a portable transmitter memorized in the central. The
procedure od activation/desactivation of " automatic downward" function is
describe in the transmitter instruction at point " downward automatic function".
The factory programs this function as "inactive".
7. PROGRAMATIONS FROM TRANSMITTER
Besides setting of " anemometer test" function and of "automatic downward"
function, through any portable transmitter previously memorized could be effect
other operations regarding the memorization and cancellation of transmitter and
the modify of the intervention threshold of the wind sensor.
7.1 Insert in memory of a new transmitter
- Take on the motor in intermediate position, so that be visible the movements of
signalation of the motor.
- Press PROG of one portable transmitter memorized for about 4 sec, since the
motor effects 2 upward movements to signal the entry in "transmitter program-
mation".
- Within 8 sec, press STOP of the transmitter to memorize (in case of radio sen-
sor press the button indicated in the radio sensor instruction).
- The central memorizes the code and signal the operation with a little upward
movement of the motor.
7.2 Cancellation of one transmitter from the memory
- Take on the motor in intermediate position, so that be visible the motor signala-
tiones movements.
- Press PROG of one portable transmitter memorized for about 4 sec, since the
motor effects 2 upward movements to signal the entry in "transmitter program-
mation".
- Within 8 sec, press STOP of transmitter to cancel (in case of radio sensor press
the button indicated in the radio sensor instruction).
- The central cancels the code and signals the operation with a little downward
movement of the motor.
7.3 Regulation of wind threshold
- Let down the awning, to be visible the signalation
that will be provide by the motor.
- Press PROG of a portable transmitter memorized
for about 4 sec, since the motor effects 2 upward
movements to signal the entry in "transmitter pro-
grammation". Issue the button PROG.
- Press again shortly "PROG" to enter in menu "wind
threshold programmation". The number of upward
movement effect by the motor is the wind threshold
actually programmed.
- If the wind threshold is that desired, expect without effect any operation. After
about 8 sec the motor effects a number of upward movement as the pro-
grammed threshold and the central turns back to the normal activity.
- If it's desired to modify the wind threshold, press and release the button Stop the
number of times equal to the desired threshold. After about 8 sec from the last
pressure, the motor effects a number upward movements equal to the new pro-
grammed threshold and the central turns back to the normal activity.
8. RESTORE OF FACTORY CONDITIONS
- Take off supply to the module.
12
Wind
threshold
1
2
3
4
5
6
(reset)
MISTRAL COMPACT_rev00
Wind
Velocity
10 Km/h
15 Km/h
20 Km/h
25 Km/h
30 Km/h
35 Km/h