Group Ride Settings; Radio; Selecting A Preset; Selecting A Radio Channel - Garmin ZUMO XT2 Owner's Manual

Group Ride Settings

From the main menu, select Group Ride >
Edit Rider Name: allows you to set your name that displays during a group ride. This setting is not available
during an active group ride.
Rider Map Labels: sets the label displayed for each active rider on the map.
Show Tracks on Map: shows the track that each group ride member takes on the map.
Reset Default Settings: allows you to reset all group ride settings to default values. This setting is not available
during an active group ride.

Radio

NOTE: this feature is not available on all product models.
NOTE: before you can use the Radio app, you must install a Group Ride accessory. Go to
purchase a Group Ride accessory.
You can use the Radio app to create radio presets, select a radio channel and select squelch codes. To use this
feature, you must connect the device and the antenna to the Group Ride mount. The zūmo device configures
radio settings automatically when you join or create a group ride.

Selecting a Preset

NOTE: for some product models, the Radio app is located in the apps menu.
1 From the main menu, select
2 Select an option:
• To move through the available presets, select
• To select a preset from the menu, select Preset.

Selecting a Radio Channel

1 From the main menu, select
2 Select an option:
• To move to a different channel, select
• To select a MURS channel from the menu, select Channel.

Adjusting the Squelch

You can adjust the squelch and change between CTCSS, DCS and Open squelch modes to improve audio quality
and avoid radio interference in your area.
1 From the main menu, select
2 Select an option:
• To choose a squelch code within the current mode, select
• To adjust the squelch mode, select Open.

Adding a Custom Radio Preset

1 Select > Radio > Preset >
2 Select or to select a channel and squelch code.
3 Select Save.
Using the apps
.
> Radio.
or
> Radio.
or .
> Radio.
.
.
or .
garmin.com to
35