Table of Contents
Advertisement
hazard avoidance
3) Press the OPERATE Softkey to begin displaying traffic. 'OPERATING' is
displayed in the Traffic Mode field.
4) Press the ALT MODE Softkey to change the altitude display volume. Select
the desired altitude volume by pressing the BELOW, NORMAL, ABOVE,
or UNREST (unrestricted) Softkey. The selection is displayed in the Altitude
Mode field.
5) Press the STANDBY Softkey to place the system in the Standby Mode.
'STANDBY' will be displayed in the Traffic Mode field.
6) Rotate the Joystick clockwise to display a larger area or rotate counter-
clockwise to display a smaller area.
Displaying Traffic on the Navigation Map
1) With the Navigation Map displayed, press the MAP Softkey.
2) Press the TRAFFIC Softkey. Traffic will now be displayed on the map.
terrain aWareness & Warning system (taWs) display
NOTE: Terrain data is not displayed when the aircraft latitude is greater than
75 degrees north or 60 degrees south.
NOTE: TAWS operation is only available when the G1000 is configured for a
TAWS-B installation.
manual system test
1) While the TAWS Page is displayed, press the MENU Key.
2) Turn the small FMS Knob to select 'Test TAWS System'.
3) Press the ENT Key. During the test 'TAWS TEST' is displayed in the center
of the TAWS Page.
When all is in working order, " TAWS System Test, OK " will be heard.
display terrain on the taWs page
1) Turn the large FMS Knob to select the Map Page Group.
2) Turn the small FMS Knob to select the TAWS Page.
3) If desired, select the VIEW Softkey to access the ARC and 360 softkeys.
When the ARC Softkey is selected, a radar-like 120° view is displayed.
Select the 360 Softkey to return to the 360° default display.
40
Garmin G1000 Cockpit Reference Guide for the Beechcraft 200/B200 Series
190-00929-00 Rev. A
Advertisement
Table of Contents
