[59] How to Use
Zebra
The zebra pattern will appear over part of an image if the brightness level of that part meets
the IRE level that you set. Use this zebra pattern as a guide to adjust the brightness.
1. MENU →
Menu item details
Off:
Does not display the zebra pattern.
70/75/80/85/90/95/100/100+:
Adjusts the brightness level.
Note
The zebra pattern is not displayed during HDMI connection.
[60] How to Use
Exposure Set. Guide
You can set whether to display a guide when you change the exposure.
1. MENU →
Menu item details
Off:
Does not display the guide.
On:
Displays the guide.
Using shooting functions
(Custom Settings) → [Zebra] → desired setting.
Using shooting functions
(Custom Settings) → [Exposure Set. Guide] → desired setting.
Adjusting the exposure
Adjusting the exposure