Disposal; Warranty; Technical Data - Dometic MWE9104 Installation And Operating Manual

EN
Problem
A long tone sounds (approx. 3 sec-
onds) after switching on the ignition.
The display of the control electronics
shows an error code (E1 - E4).
Device indicates obstacles incorrectly
(false alarm).

17 Disposal

Place the packaging material in the appropriate recycling waste bins wherever possible. Consult a local
recycling center or specialist dealer for details about how to dispose of the product in accordance with
the applicable disposal regulations. The product can be disposed free of charge.

18 Warranty

The statutory warranty period applies. If the product is defective, please contact the manufacturer's branch in your
country (see dometic.com/dealer) or your retailer.
For repair and warranty processing, please include the following documents when you send in the device:
• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
Note that self-repair or nonprofessional repair can have safety consequences and might void the warranty.

19 Technical data

Detection range of the
sensors:
Stop zone
Measuring range
16
Possible cause
One or more sensors are defective.
The error code indicates the defective
sensor(s) (see chapter
e parking aid).
The plugs for the sensors are not con-
nected or are not properly plugged
into the control electronics. The er-
ror code indicates the sensors not de-
tected (see chapter Connecting the p
arking aid).
Dirt or frost on the sensors
The sensors were incorrectly installed.
The sensors have contact with the
chassis.
Objects on the vehicle (e. g. spare
wheel) lead to false alarms.
MWE9104
Approx.0.1 m ... 0.35 m
Approx.0.35 m ... 1.6 m
Suggested remedy
Connecting th
Approx.0.1 m ... 0.35 m
Approx.0.35 m ... 0.8 m
Replace the defective sensor(s).
Ensure that the plugs are firmly
inserted.
Clean the sensors.
Adjust the position or height of
the sensors.
Disconnect the sensors from the
chassis.
Suppress the detection of fixed
objects (see chapter Supress
ing the display of fixed objects).
MWE9104F